Rainbow Leather Walls


The finest real leather wall tile, pure aniline dyed leather available in 22 colors. Our wall tile is seven ounce American cowhide that is dyed through, oiled and glazed to give every wall unique depth and beauty. The glaze allows easy cleaning. Our design and adhesive allows installation on any clean smooth surface including painted sheetrock or plaster. Available in a smooth finish or embossed with any of our hundreds of textures or patterns.

Hand painted borders, laser tooled borders and leather wrapped molding will complete your walls with the perfect finishing touch.

Few things possess leather’s enduring beauty and quality. A leather wall may well be “the ultimate leather accessory.”

Color Line

ARMAGNAC

BOURBON

BURGUNDY

CORAL

FUDGE

GREEN APPLE

GREY

HERSHEY

JADE

LIPSTICK

MANILLA

MIDNIGHT

MING RED

MOCHA

ORANGE

PINK

SAILOR

SKY BLUE

TURQUOISE

WESTERN TAN

Introducing Five New Colors of Rainbow Wall Tile

ASIAN PLUM

COCONUT

KIWI

MARASCHINO

PARSNIP

Installation Guidelines for Rainbow Leather Wall Tile

IMPORTANT:
Please note: We recommend that leather tiles be installed only by professionals accustomed to installing leather tile, cork tile or custom vinyl tile we can also send one of our factory trained experts to do the installation. All tiles of a resilient nature i.e. leather, vinyl, cork, rubber, etc. will “telescope” the surface under them. For example, a grain of sand under the tile will, in part due to the light reflection, will look the size of a green pea.

Leather wall tile must be acclimated for five to seven days on site at the average temperature and humidity levels that will be maintained in the space.

Rainbow leather wall tile is the only real leather wall on the market it can be glued directly to almost any oil free, clean, dry surface including sheetrock, plaster, wood and concrete. Painted, treated, or glazed surfaces must be scuffed-up and free of all old adhesive or other contaminants that might act as a bond breaker.

Walls newly painted with latex paint must cure for 90 days, see manufactures specifications.

Our leather tile should only be installed using “Stampede” our quick-grab leather wall tile glue. The adhesive has a low VOC content, making it safe and environmentally friendly

INSTALLATION:
1 – Acclimate your leather tile by opening the packaging and storing the tile in the space it is to be installed for 5-7 days at the average temperature and humidity that the space will be maintained.

2 – Prior to installation the wall must be repaired so that any and all protrusions, nails, screw heads and the like are below the wall level and patched. If your surface is not painted it is best to prime the wall with Zinssar, BIN primer sealer or a similar shellac based primer.

3 – We suggest that the installer spread the tile out on the floor and allow for the possibility that they may want some of the tiles repositioned before gluing to the wall. (We recommend this due to the normal, desirable color variations in our premium hand glazed aniline dyed leather.)

4 – The lay-out is like any tile lay-out, consider your cuts, or fills around the perimeter, they should as even as possible and as large as possible. Using a laser level you will need vertical and horizontal lines that intersect to create a 90 degree angle. This will be your starting point, working from the 90 degree mark outward in a stepping installation.

5 – Using a brush and or a roller, apply Stampede adhesive on to the back of the tile. Only one coat of adhesive is needed, too much adhesive will squeeze out the sides when roller, too little and the tile will not stick. Apply tile to wall at once, stepping tiles as you would any other tile installation. Roll the face of the tile with a foam adhesive roller, do this until your field is complete, then measure fill to the wall cut tile with utility knife and metal straight edge. This information supersedes anything on the Stampede label.

This tile should not be waxed. This tile should not be cleaned with a harsh cleaning product.

Our leather wall tile is naturally finished with an exclusive surface heat plating method that leaves the leather with an “old world patina” and then the surface is hand glazed. This tile should only be wiped with a clean anti-static cloth to remove dust and with an eco-friendly glass cleaner to remove dirt and grease. Our technical department and installation experts are always available for you to consult with.

Our technical department and installation experts are always available for you to consult with.

Specifications

PRODUCT: Finished Cow hide

TANNING METHOD: *Vegetable tanned (Eco-friendly, chrome free)

DYE METHOD: Aniline Drum dyed – all the way through

*Due to the tanning, dying and waxing used our Rainbow leather wall tiles have:
1 – Increased dimensional stability
2 – Water repellency
3 – A natural patina
4 – easy to wipe clean
5 – Sound coefficient

TILE SIZES (in inches): 2x8, 4x6, 6x6, 6x12, 9x9, 9x12, 12x12, 9x18, 12x18, and 18x18.

TILE THICKNESS: 3/16th inch (+or -)

TILE WEIGHT: 5 to 7 ounce per square foot

FIRE AND SMOKE: Class A

MAINTENANCE: Light dusting and eco-friendly glass cleaner to remove dirt or grease.

INSTALLATION: Use only Stampede Adhesive to install our leather tile

BOTH FABRICATION AND INSTALLATION ARE AVAILABLE
Especially with our wall tile samples may not be representative of the entire hide.
Leather: The perfect imperfect product.

Maintenance of Leather Wall Tile

This tile should not be waxed. This tile should not be cleaned with a harsh cleaning product.
Our leather wall tile is naturally finished with an exclusive surface heat plating method that leaves the leather with an “old world patina” and then the surface is hand glazed. This tile should only be wiped with a clean anti-static cloth to remove dust and with an eco-friendly glass cleaner to remove dirt and grease. Our technical department and installation experts are always available for you to consult with.
Our technical department and installation experts are always available for you to consult with.

PRICING FOR CUSTOM SIZES AVAILABLE UPON REQUEST
CUSTOM WRAPPED LEATHER MOLDINGS TO MATCH OR ACCENT.
As a courtesy to our clients we will ship full hides to your upholster.
Production and delivery 4 – 6 weeks FOB California.
Minimum order 30 sq.ft. or an additional charge will apply